FD 90 (FLUSH DOOR, 1100 X 2400 mm)


Descriptions and Specifications:
  • Hardwood lipping all-round; mechanically glued onto the door leaf.
  • Inner frame for door leaf made of hardwood consisting of vertical stiles, top, bottom & mid-rails. This frame guarantees structural integrity to the door leaf and facilitates easy installation of ironmongery like hinges, lock case, closer etc. Inclusion of inner frame within the leaf is a special feature of (IDEAL LOGO) doors which is not seen in most ready-made door blanks.
  • Inner frame of the leaf is lined on both faces with a fire resistant mineral board which over sails the frame member and acts as an additional re-enforcement to hold the core in place.
  • Main feature of (IDEAL LOGO) fire rated doors is our proprietary ‘mineral core’ molded inside the inner frame of the leaf. This core is 100% fire resistant in addition to being light in weight and having excellent thermal properties.
  • An outer skin of Plywood/MDF/HDF is pressed on the above assembly and lipping is then added which can take final finishes such as paint, veneer, laminate etc.
  • Door frame is made of hardwood having minimum cross section as shown in the sketch. Moisture content and density of timber shall be as given in the test report.
  • Self-adhesive intumescent fire seals are provided within grooves in the rebate as shown in the sketch. These can also be fixed on the leaf edges instead of the door frame.